Stid SPECTRE Notice D'installation page 5

SPECTRE Access UHF
Read only & OSDP™
Installation procedure
Mount with a 75 x 75 mm / 0.79 x 0.79 in VESA standard
mounting bracket M4x12 stainless steel screws provided
with mounting kit)
Or mount directly on a wall
Ø4x35 aluminum screws provided (TCL ALU 4x12).
An antenna must be connected to the RF port 1 (closed to the LEDs).
RF Port 1
Attach the antenna on the module with the 4 screws (TCL ALU M4x12)
-
provided
with the module.
Remove the cap from port RF 1.
-
Connect the antenna to port RF 1 of the module.
-
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X07 - Page 4 sur 18 - Ed. 28/05/2021
UHF SPECTRE Access
Lecture seule & OSDP™
Notice d'installation
Mounting - SMA
Two mounting possibilities:
Adjustable wall-mounted kit
(refer to the Installation Procedures
for KFX-UHF-08)
Wall
Antenna Connection - SMA
Mounting an Antenna on Module - SLA
UHF SPECTRE Access
Solo lectura & OSDP™
Manual de instalación
Adjustable pole-mounted kit
(refer to the Installation Procedures
for KFX-UHF-09)
4 serializable cable lengths are available:
1.5 m /4.92 ft: CAB-SPECTRE-1.5M
3 m / 9.84 ft: CAB-SPECTRE-3M
9 m / 29.53 ft: CAB-SPECTRE-9M
12 m / 39.37 ft: CAB-SPECTRE-12M
Only possible combinations:
CAB-SPECTRE-1.5M + CAB-SPECTRE-1.5M
CAB-SPECTRE-1.5M + CAB-SPECTRE-3M
CAB-SPECTRE-1.5M + CAB-SPECTRE-9M
CAB-SPECTRE-3M + CAB-SPECTRE-3M
US
FR
ES
Pole
Antenna must be
connected to RF Port 1