Stid SPECTRE Notice D'installation
Masquer les pouces
Voir aussi pour SPECTRE:
- Notice d'installation (19 pages) ,
- Notice d'installation (16 pages)
Publicité
Liens rapides
Publicité
Manuels Connexes pour Stid SPECTRE
Sommaire des Matières pour Stid SPECTRE
- Page 1 Installation Notice Manual de procedure d’installation Instalación...
- Page 2 Careful: There is a 5.5 volts DC on each RF port. © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 1 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 3 Data/Clock or D0/D1 Channel 4 Not used ALIM Power supply © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 2 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 4 Configuration Only STid antennas can be used with read-only and OSDPTM modules. Please refer to the STid antenna installation procedure for module/antenna compatibility. The number of antennas & channels and the communication protocol are configurable with the Ultrys V2 application or when the module is ordered. Please refer to Ultrys for more details about configuration settings.
- Page 5 Antenna must be connected to RF Port 1 © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 4 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 6 CAB-SPECTRE-12M 2.4 dB Note: cable losses add up when several cables are coupled. Ex: CAB-SPECTRE-1.5M (0.55 dB) + CAB-SPECTRE-3M (1.1 dB) = total loss 1.65 dB Antenna Connection An antenna must be connected to the RF port 1 (closed to the LEDs).
- Page 7 Attention : Il y a un 5,5 volts DC sur chaque port RF. © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 6 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 8 Data/Clock ou D0/D1 de la voie 4 Non utilisée ALIM Alimentation © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 7 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 9 LED rouge (500ms ON / 500 ms OFF) Communication : LED verte © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 8 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 10 Ex : CAB-SPECTRE-1,5M (0,55 dB) + CAB-SPECTRE-3M (1,1 dB) = perte totale 1,65 dB. © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 9 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 11 3 dB. Déclaration de conformité STid déclare que les modules SMA-R5x/R4x-A sont conformes aux exigences essentielles de la Directive RED 2014/53/UE et RoHs 2011/65/UE et Directive déléguée 2015/863/UE. Une copie de notre déclaration est disponible sur demande adressée à qualite@stid.com.
- Page 12 Cuidado: Hay 5,5 voltios CC en cada puerto RF. © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 11 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 13 Data/Clock o D0/D1 de la vía 4 no utilizado ALIM Alimentación © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 12 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 14 Configuración Sólo se pueden utilizar antenas STid con módulos de solo lectura y OSDP™. Consulte el procedimiento de instalación de la antena STid para conocer la compatibilidad del módulo/antena. El número de antenas, el número de vías, el protocolo de comunicación se puede configurar mediante la aplicación ULTRYS o al realizar el pedido del lector.
- Page 15 Ej.: CAB-SPECTRE-1.5M (0.55 dB) + CAB-SPECTRE-3M (1.1 dB) = pérdida total 1.65 dB. © STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X08 - Page 14 sur 15 - Ed. 28/10/2024 STid reserves the right to make change without notice, for the purpose of product improvement.
- Page 16 3 dB. Declaración de conformidad STid declara que los módulos SMA-R5x/R4x-A cumplen las exigencias esenciales de la Directiva RED 2014/53/UE y RoHs 2011/65/UE y la Directiva delegada 2015/863/UE. Una copia de nuestra declaración está disponible enviando una solicitud a qualite@stid.com.