Husqvarna DE 110S Manuel D'utilisation page 19

Maintenance
Make sure that the Longopac is correct
and that it is correctly attached. Refer to
# .
Do a check of the filter purge function.
Do a check of the wheels. Look for
damage and bad connections.
Do a check of the filter seals.
Do the filter purge procedure. If the suc-
tion continues to be not sufficient, clean
the prefilter with water. Refer to
Replace the cleaned prefilter if the suc-
tion continues to be not sufficient. Refer
# .
to
Replace the HEPA filter.
Replace the dust release rubber cone.
Replace the filter cleaning rubber parts.
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
Maintenance
Do the filter purge procedure. Refer to
To remove dust particles from the prefil-
ter during operation on page 17 .
Look for signs of wear or damage of the
dust release rubber cone.
Do a check of the power plug and the
power cord.
Look for signs of wear, damage or loose
connections of the controls before the
unit is connected.
Do a check of the hose and the hose
connectors.
Look for signs of wear or damage of the
plastic parts.
Do a check of the lifting eyes.
Make sure that the Longopac is correct
and that it is correctly attached. Refer to
To install a new Longopac bag cassette
on page 17 .
1587 - 007 - 24.01.2022
Before
each use
# .
Before
each use
X
X
X
X
X
X
X
Daily Weekly suction is
X
X
X
X
Daily Weekly suction is
X
When Each 6
months or months or
low 600 h
X
X
X X
When Each 6
months or months or
low 600 h
Each 12
2000 h
X
X
X
Each 12
2000 h
19