Installation Instructions - GE Appliances JP3021 Manuel D'utilisation Et Instructions D'installation

Installation
Instructions
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
•
instructions for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• P roduct failure due to improper installation is not
covered under the Warranty.
WARNING
This appliance must be properly
grounded.
ATTENTION INSTALLER
•
— ALL COOKTOPS MUST BE HARD WIRED
(DIRECT WIRED) INTO AN APPROVED
JUNCTION BOX. A "PLUG AND RECEPTACLE"
IS NOT PERMITTED ON THESE PRODUCTS.
• Proper installation is the responsibility of the
installer and product failure due to improper
installation is NOT covered under warranty.
PARTS INCLUDED
Foam Tape
12
— Save these
— Observe all governing
(2) Hold-Down Brackets
(2) 2-3/8" Screws
21" Electric Cooktop
JP3021
MATERIALS YOU WILL NEED
Junction Box
TOOLS YOU WILL NEED
Pencil
Phillips-Head
Screwdriver or
1/4" Nut Driver
Ruler or Straightedge
Safety Glasses
Wire Nuts
Saber Saw
1/8" Drill Bit & Electric
or Hand Drill
49-2000738 Rev. 3