Beurer Velvet Skin Pro Mode D'emploi page 26

• Do not use the beurer Velvet Skin Pro on naturally dark skin. Treating dark skin with the beurer Velvet
Skin Pro can have adverse consequences, such as burns, blisters or discolouration of the skin (hyper
or hypopigmentation).
• The beurer Velvet Skin Pro works best on darker hair types or on hair with a high melanin content.
Black and dark brown hair shows the best response and, although brown and light brown hair will
also respond to the treatment, it usually requires more hair removal sessions. Red hair could produce
a reaction. White, grey or blond hair does not usually respond to the beurer Velvet Skin Pro, although
several users have noticed results after multiple hair removal sessions.
• The beurer Velvet Skin Pro can cause temporary pigmentation.
• Do not attempt to open or repair your beurer Velvet Skin Pro device. When the beurer Velvet Skin Pro
is opened, you could come into contact with dangerous electrical components or with pulsed light
energy, which could result in serious injury and/or permanent damage to the eyes.
DANGER
Keep the beurer Velvet Skin Pro away from water! The beurer Velvet Skin Pro is an elec-
trical device. Do not place it in water or allow it to fall into water or any other liquid.
This can lead to severe electric shock.
• Do not use the beurer Velvet Skin Pro when you are taking a bath.
• Do not use the beurer Velvet Skin Pro when the device is damp or wet.
• Do not reach for the beurer Velvet Skin Pro if it has fallen into water.
• Never touch the mains plug or the device with wet hands!
Notes on handling batteries
• If your skin or eyes come into contact with fluid from a battery cell, flush out the affected areas with
water and seek medical assistance.
• Protect batteries from excessive heat.
• Risk of explosion! Never throw batteries into a fire.
• Do not disassemble, open or crush the batteries.
• Only use chargers specified in the instructions for use.
• Batteries must be charged correctly prior to use. The instructions from the manufacturer and the spe-
cifications in these instructions for use regarding correct charging must be observed at all times.
• Fully charge the battery prior to initial use (see Chapter 8.1).
• In order to achieve as long a battery service life as possible, fully charge the battery at least twice per
year.
IMPORTANT
To prevent damage
• Do not attempt to open or repair your beurer Velvet Skin Pro device. Attempting to open the beurer
Velvet Skin Pro can damage the device and invalidates your warranty.
• During use, do not expose the device to temperatures below 10 °C or above 40 °C.
• The device should never be left unattended when the mains part is plugged into a socket.
• Only use the beurer Velvet Skin Pro for its intended purpose and as described in the instructions
for use.
• Do not operate the beurer Velvet Skin Pro if a cable or plug is damaged and keep the mains cable
away from hot surfaces.
• Pull the mains plug of the beurer Velvet Skin Pro out of the socket before cleaning.
• Pull the mains plug out of the socket after charging the battery.
• Do not use the beurer Velvet Skin Pro with attachments or accessories that are not recommended
by Beurer GmbH.
• Do not use the beurer Velvet Skin Pro if you see or smell smoke while using the device.
• Do not use the beurer Velvet Skin Pro if it is not working properly or if it appears to be damaged.
26