stayer VENTO L20 Instructions D'emploi page 19

REGULATIONS
5.
Technical Data
= Power input
= No load speed
= Maximum air speed
= Capacity sac receiver
=Airflow
=Airflow
=Weigth
= Sound power level
L
WA
L = Sound pressure level
PA
=Vibration
NORMATIVE
6.
The values given are valid for nominal voltages [U]
230/240 V - 50/60 Hz - 110/120 V- 60Hz. For lower voltage
and models for specific countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual machines
may vary.
Wear hearing protection!
The vibration emission level has been measured in
accordance with a standardised test given in EN 62841-1;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned.
- Using the tool for different applications, or with
different or poorly maintainted accessories, may
significantly increase the exposure level.
- The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing yourwork patterns.
ENGLISH
19
19