Introduction; Extension Cords (230V) - Amano American Sanders EZ-8 Manuel

EN
Control Switch
Control Link
Locking Collar
Handle Latch
Level Adjustment
Model 07012A
8˝ x 19˝sleeve
Abrasive Size
(20.3 x 48.2 cm)
Abrasive Rate 2830 ft/min
Drum Rate
1800 RPM
Dust Control Rate 76 CFM
Drum Pressure 25 lbs (11.4 kg)
Leveling Controls Externally Adjustable
Operating Controls Lever Operated
1½ HPTEFC
Motor
Thermally Protected
40΄ (12.1m) 12 Gauge
Power Cable
Abrasive Resistant
Voltage Frequency 115 / 60
Amperage
12
21½˝ x 16˝ x 35½˝
Dimensions (in)*
(54.6 x 40.6 x 90.2 cm)
Weight (lbs) *
125 (57 kg)
* Shipping Value
Use only an approved extension cord with three conductors, a plug with three terminals, and a connector body with three holes.
WARNING: If you use an extension cord, use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer than
50 feet. Do not join two extension cords.
Use only an approved extension cord with two main conductors and one earthing conductor.
WARNING:
If you use an extension cord, use an extension cord with minimum wire size 10 AWG. Do not use an extension cord longer
than 50 ft. Do not join two extension cords.
WARNING:
Do not cut, remove, or break the ground terminal. Do not try to fit a three-terminal plug into a receptacle or connector body
that does not fit the plug. If the receptacle or connector body does not fit the plug, see your Authorized person to make
the connection.

Introduction

Operating
Control Lever
Dust Pipe
Transport Handle
Drum Cover
07058A
8˝ x 19˝sleeve
(20.3 x 48.2 cm)
2830 ft/min
1800 RPM
76 CFM
25 lbs (11.4 kg)
Externally Adjustable
Lever Operated
1½ HPTEFC
Thermally Protected
40΄ (12.1m) 12 Gauge
Abrasive Resistant
115 / 60
12
21½˝ x 16˝ x 35½˝
(54.6 x 40.6 x 90.2 cm)
125 (57 kg)
Extension Cords (120V)

Extension Cords (230V)

CAUTION:
07060A 07084A
8˝ x 19˝sleeve 8˝ x 19˝sleeve
(20.3 x 48.2 cm) (20.3 x 48.2 cm)
2360 ft/min 2360 ft/min
1500 RPM 1500 RPM
64 CFM 64 CFM
25 lbs (11.4 kg) 25 lbs (11.4 kg)
Externally Adjustable Externally Adjustable
Lever Operated Lever Operated
1½ HPTEFC 1½ HPTEFC
Thermally Protected Thermally Protected
50΄ (15.2m) 12 Gauge 40΄ (12.1m) 12 Gauge
Abrasive Resistant Abrasive Resistant
240 / 50 240 / 50
6
21½˝ x 16˝ x 35½˝ 21½˝ x 16˝ x 35½˝
(54.6 x 40.6 x 90.2 cm) (54.6 x 40.6 x 90.2 cm)
125 (57 kg) 125 (57 kg)
6
Your equipment may be inappropriate on some
installations. Always consult with the flooring
manufacturer on the proper installation, preparation,
and finishing of their product. Determine suitability of
your equipment in preparing the product.
07057A
8˝ x 19˝sleeve
(20.3 x 48.2 cm)
2830 ft/min
1800 RPM
76 CFM
25 lbs (11.4 kg)
Externally Adjustable
Lever Operated
1½ HPTEFC
Thermally Protected
40΄ (12.1m) 12 Gauge
Abrasive Resistant
115 / 60
6 12
21½˝ x 16˝ x 35½˝
(54.6 x 40.6 x 90.2 cm)
125 (57 kg)
07240A
8˝ x 19˝sleeve
(20.3 x 48.2 cm)
2360 ft/min
1500 RPM
64 CFM
25 lbs (11.4 kg)
Externally Adjustable
Lever Operated
1½ HPTEFC
Thermally Protected
40΄ (12.1m) 12 Gauge
Abrasive Resistant
240 / 50
6
21½˝ x 16˝ x 35½˝
(54.6 x 40.6 x 90.2 cm)
125 (57 kg)