Set Password - Bushnell TRAILSCOUT 119833 Mode D'emploi

Setup Guide (cont.)
(1) SET DATE: When the LCD shows the date, press the ENtER key to modify the date.
Set Date
09/18/04
(2) SET TIME: When the LCD shows the time, press the ENtER key to modify the time.
Set time
06: 30 PM
(3) SET NAME: When the LCD shows current name, press ENtER key to modify the
MY NAME
555_1234

(4) SET PASSWORD:

Password
Set
10
Press Up or Down button to select 1-12 then press the ENtER button to
confirm the two digit month. The cursor will then move to the day.
Press Up or Down button to select 1-31 then press ENtER to confirm the two
digit day. Then the cursor will move to the year.
Press Up or Down button to select 0-99,then press ENtER to confirm the two
digit year. From Set Date, press the Down button to set the time.
Note: See "Other Setup Notes" for details on the moon phase
stamp feature, which is linked to the date you set here.
Press Up or Down button to select 1-12, then press ENtER to confirm the two
digit hour. Then the cursor will move to the minute.
Press Up or Down button to select 0-59, then press ENtER to confirm the two
digit minute. From SEt tiME, press the Down button to set the name.
name display. Press Up or Down button to select one character from "A" to "Z",
"0" to "9", "_" , then Press ENtER to confirm, the cursor will move to next character.
There are 2 lines of 8 characters each for your use. From Set Name, press the Down
button to change the password.
When the LCD shows [Password Set], press the ENtER key to set the password.