Vicks CoolRelief VUL600 Série Guide D'utilisation Et D'entretien page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Filling/Refilling
NOTE: Tank should be carried using two hands, one hand using one of the carrying handles located
on Tank Top and the other hand supporting the base of the Tank. Manufacturer and Distributor
will not accept responsibility for property damage caused by water spillage.
1.
Remove Tank and turn upside down.
2.
Turn Tank Cap in the direction of the
open lock symbol to remove cap.
3.
Fill Tank with cool water. DO NOT
fill with warm or hot water. DO NOT
ADD ESSENTIAL OILS, MEDICATIONS,
OR INHALANT LIQUIDS such as Vicks VapoSteam to
the Water Tank. Doing so could cause damage to the
humidifier and void the warranty.
4.
Securely replace Tank Cap, aligning arrow to lock symbol.
5.
Place Tank back on Base.
CAUTION: USE CARE WHEN HANDLING WATER TANK TO AVOID UNNECESSARY IMPACT. BANGING OR
DROPPING THE WATER TANK COULD RESULT IN DAMAGE TO THE TANK THAT WILL CAUSE LEAKING.
Operating Humidifier
1.
Power: With the Power Knob in the off position, plug humidifier
into a polarized 120V outlet.
SHOCK DO NOT PLUG HUMIDIFIER INTO OUTLET WITH WET HANDS.
2.
Output: Turn the Power Knob clockwise to highest setting.
It is recommended you set the output to high until you reach a
comfortable humidity level.
3.
Position humidifier to direct mist output away from walls, furniture
and bedding.
4.
Humidity Level: When a comfortable humidity level is reached,
turn Power Knob to a lower setting. A comfortable humidity level is between 40-60%.
To monitor your humidity level, use a humidity monitor such as the Vicks V70 or V70-CAN model. (Not included)
If you notice condensation on the walls, windows or around unit, your humidity level
is too high. Turn humidifier off.
Using Vicks VapoSteam
Liquid Inhalants such as Vicks VapoSteam can be used in the Medicine Cup.
ONLY USE LIQUIDS THAT ARE RECOMMENDED FOR THIS
TYPE OF HUMIDIFIER.
1.
Add 1 Tablespoon of inhalant to the Medicine Cup.
DO NOT fill beyond the MAX level line molded on the
inside. ONLY pour inhalant into Medicine Cup.
Step 1
CAUTION: TO AVOID ELECTRIC
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1
Step 2
Step 3
Step 4
Liquid Inhalant
1 Tbsp
5

Publicité

Table des Matières
loading

Table des Matières