Table des Matières
Publicité
Changing chimney connection
The fireplace is supplied ready for connection to the top outlet but can be changed to use the bottom
outlet by following this procedure:
1.
Tap out the cover behind the gas fireplace us-
ing a hammer. This may require several knocks.
Exercise care and ensure you only hit the cover.
2.
Loosen the three screws on the outer flange on
the top of the fireplace. Remove it.
3.
Unscrew the top cover plate behind the fire-
place and move to the top of the fireplace.
CHANGING CHIMNEY CONNECTION
GB - 25
Publicité
Chapitres
Table des Matières
Dépannage
