RAIS/attika NEXO GAS Notice D'installation page 239

Table des Matières

Publicité

NB!
To connect the MyFire-wi-fi-box to the wi-fi router (home network) you must ensure that:
• The home network is accessible.
• The name and code for the network is correct.
• The wi-fi-router SSID key is not hidden.
• The home network signal is within range.
• The wi-fi router supports the User Datagram Protocol (UDP).
Connect your mobile or tablet to the wi-fi router:
NB: Once a connection is established, a pop-up notification will be shown, prompting you to enter
the wi-fi settings.
1. Press "OK" if the information is correct.
Confirm the fireplace settings:
1. Check the fireplace settings. If your gas fireplace has a light, double burners, fan or other
accessories, these must be confirmed in the settings.
2. Click on "Finish".
A list of the connected MyFire wi-fi-boxes is shown.
1. Press the "Start App" button to complete the installation.
The start screen is displayed and the app is ready for use.
CONFIGURATION OF THE MYFIRE APP
GB - 53

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Viva l gasQ-tee 2 gasQ-tee 2 c gas

Table des Matières