Yakima 8890027 Instructions De Montage page 2

To open cover, pry
and pull forward.
Push end caps onto the ends of
the crossbars.
SET BARS AND TOWERS ONTO CAR:
Lower Towers onto Landing Pads.
1033015D-2/12
Using the wrench provided,
loosen towers.
Slide two towers onto
each crossbar. Do not
tighten.
Be careful to keep the bars horizontal; the loose
towers could slide from the bar and fall.
• Open cover to Control Tower
and lower into Landing Pad.
• Control Tower cannot seat
properly into Landing Pad
unless the cover is open.