Beem B7.001 Mode D'emploi page 59

The appliance now starts to perform the selected baking programme.
The progress of the baking program is indicated by the triangle on
the left or right side of the display.
NOTE
► You can interrupt a programme by holding the
pressed for about two seconds.
At the end of the baking time, an acoustic signal sounds several
times. The holding phase starts (menus 1-6, 10 and 11 only).
NOTE
► You can also take the baking form out of the appliance during
the holding time. To do this, terminate the programme by hold-
ing the
mains plug out of the plug socket.
At the end of the programme, the display shows the selected
‹
starting position. Lift the baking form out of the appliance using
oven gloves. Allow the bread or cake to cool down slightly before
removing from the form.
NOTE
► Pull the dough hook/agitator out of the bread after baking be-
fore cutting the bread.
► You can also remove the dough hook/agitator after the last
kneading cycle of the selected baking programme so that it
does not leave a hole in the bread after baking.
Coat your hands with a little flour and lift out the bread dough
in order to be able to pull the dough hook/agitator up out of the
baking form.
► Further tips on an optimum baking result can be found in the
recipe book supplied.
BEEM - Elements of Lifestyle
button pressed for about two seconds and pull the
operation and function
button
EN
59