Beem B7.001 Mode D'emploi page 52

Initial use
EN
52
Inserting dough hook/agitator
Press the dough hook/agitator onto the driving pin in the middle
‹
of the baking form base. Hook and pin have flat surfaces and
only fit together when these surfaces are aligned. The driving pin
is held by a wing nut on the underside of the baking form.
Removing dough hook/agitator
Hold the wing nut on the underside of the baking form firmly with
‹
one hand and the dough hook/agitator firmly with the other.
Pull the dough hook/agitator off the driving pin with a slight turn-
‹
ing movement while turning the wing nut in the opposite direction
at the same time.
NOTE
► You can remove the dough hook/agitator after the last knead-
ing cycle of the selected baking programme so that it does not
leave a hole in the bread after baking.
Coat your hands with a little flour and lift out the bread dough
in order to be able to pull the dough hook/agitator up out of the
baking form.
BEEM - Elements of Lifestyle