Description Of The Control Unit; Electric Connections; Technical Specifications - V2 EASY-BASIC Mode D'emploi

DESCRIPTION OF THE CONTROL UNIT

The EASY-BASIC analog control unit is an innovative V2 product
that guarantees safety and reliability for the automation of roller
shutters.
• Adjustment and programming by trimmer and dip-switch
• 230V power supply for 1 single-phase motor
• Built-in radio receiver (433,92 MHz)
• Operation with Personal Pass or Royal series transmitters
• Possibility of storing up to 30 different codes (Personal Pass)
• Start, stop / safety edge inputs
• 1 input for photocells
• STOP input, can also be used to control a resistive edge
(J1 jumper NOT inserted)
• Start and courtesy light from transmitter
• 230V output for flashing light or courtesy light
• Monitoring of input status shown by LEDs

TECHNICAL SPECIFICATIONS

Power supply
Max motor load
Max accessories load
24 Vac
Working temperature
Protection fuse
Dimensions
Weight
Protection
230V models 120V models
230 V / 50 Hz 120V / 60Hz
1100 W 600 W
3 W
-20 ÷ +60 °C
F1 = 5A delayed
F2 = 160 mA delayed
170 x 185 x 70 mm
800 g
IP55

ELECTRIC CONNECTIONS

H1 Antenna
H2
Antenna shield
H3
START. N.O. contact
H4
STOP. N.C. contact
(STOP button - J1 inserted)
EDGE
(Resistive safety edge - J1 NOT inserted)
The intervention of the safety edge disables automatic
closing.
H5 COMMON (-)
H6 PHOTOCELL. N.C. contact
H7-H8
24 Vac power output for photocells and
other accessories
Flashing light 230Vac / 120Vac
E1 - E2
Courtesy light 230Vac / 120Vac
E3
Motor open
E4 Motor common
E5 Motor close
N 230Vac / 120Vac power supply - neutral
L 230Vac / 120Vac power supply - phase
- 8 -