Cleaning And Maintenance; Storage - SilverCrest SSE 6 C3 Mode D'emploi

Cleaning and maintenance

■ Turn off the appliance by pressing the "-" button 9 repeatedly until
"OFF" appears in the display 8 .
■ Wipe the appliance with a damp cloth . If required, use a mild
detergent on the cloth .
■ If one of the sensors 4/6 is dirty, clean it carefully with a damp
cloth .
■ The LED 5 cannot be replaced .

Storage

cAutIon! ApplIAnce dAmAge!
► Do not turn the soap dispenser upside down for drying!
► If you do, water may enter the display and damage it!
♦ Always clean the appliance thoroughly before storing .
♦ If you do not intend to use the appliance for a long period, remove
any remaining soap from the soap tank . Pour some water into the
soap tank and tilt the appliance carefully from side to side to remove
any remaining soap residue . Press the "+" button 0 and the "-"
button 9 simultaneously and hold them for about three seconds .
The soapy water will flow out of the soap outlet 7 for 30 seconds .
Repeat this process until the soap tank is empty .
Then allow the appliance to stand for a while with the plug 1
removed and the lid 2 open so that the soap tank can dry out .
♦ Remove the batteries .
♦ Store the appliance in a clean, dry location .
■ 20 │
GB│IE
SSE 6 C3