Operation
1) Set the quantity of soap you want dispensed for each use . Press the
"+" button 0 or "-" button 9 repeatedly until the desired setting is
displayed . You can select from four soap quantities . The more drops
displayed in the "Soap quantity" indicator w, the more soap is
dispensed .
2) Hold your hand underneath the soap outlet 7 . The appliance starts
dispensing soap .
3) As soon as dispensing stops, you can withdraw your hand .
note
►
The soap dispensing also stops as soon as you withdraw your
hand . This is true even if the programmed quantity has not yet been
dispensed .
4) If you do not intend to use the appliance for long periods, press the
"-" button 9 repeatedly until "OFF" appears in the display 8:
5) Press the "+" button 0 to turn the appliance back on .
note
►
If you need to remove a large quantity of soap from the soap tank,
you can let the soap dispensing run for 30 seconds:
Press the "+" button 0 and the "-" button 9 simultaneously and hold
them for about three seconds . The appliance begins dispensing soap
and stops after 30 seconds .
note
►
If you have not used the appliance for several days, you may have to
activate the soap dispensing function several times in a row before
soap is dispensed again .
SSE 6 C3
│
19
■
GB│IE