Num'axes PIE 1013 Guide D'utilisation page 52

•
Once you're done, simply unplug the cable from both your
computer and the camera. The camera will turn OFF
automatically.
Deleting files in the field
•
Slide the switch to the TEST position, the status display will
show the camera current status.
•
Press the [M] button once to enter the programming mode.
•
The word "PIR" or "TLS" will be blinking, press the DOWN [▼]
button until you see the word "SEt" blinking on the LCD screen.
•
Press [M] once, the indication "- dEL -" is blinking.
•
Press [M] once, the indication "NO-dEL" (No Delete) is blinking
on the LCD screen.
•
Press the UP [▲] or DOWN [▼] button to select the desired
function:
NO-dEL (No Delete) - No images get deleted.
dL-ONE (Delete One) - Only the last file will get deleted.
dL-ALL (Delete All) - Deletes all files on the SD card.
Ft (Format) - Deletes all files and reformats the SD card.
•
Press [M] to confirm your selection.
•
Press and hold the [M] button for 2 seconds to exit the program
setting and go back to the status screen, and then slide the
switch to OFF.
Technical Specifications
System Requirements and Compatibility
•
Windows Vista / Windows 7 / Windows 8 / MAC 10.6 or above
or your device supports MSDC mode (Mass Storage).
•
Pentium 4, 2GHz or above
•
1GB RAM (2GB recommended)
Indice A 52/144