Num'axes PIE 1013 Guide D'utilisation page 33

attempt to immerse the unit in water or any other liquid. This
will damage the unit and void the warranty.
•
Use a soft lens cloth for cleaning lens. Avoid touching the lens
with your fingers. Remove dirt or stains with a soft cloth
dampened with water or a neutral detergent. Keep your camera
in a dry and cool dust-free environment or container when it is
not used.
•
Take the batteries out when camera is not to be used over an
extended period of time.
•
Avoid dropping your camera on a hard surface.
•
Do not disassemble your camera.
•
Do not mix new and old batteries.
•
Do not open the camera for unauthorized service. This could
cause serious damage to the unit and will void the warranty.
NOTE: This camera is a precision electronic device. Do not
attempt to service this camera by yourself, as opening or
removing covers may expose you to dangerous voltage points
or other risks.
Definitions
•
Passive Infrared Sensor (PIR): detects the moving objects.
•
Microphone: picks up the sounds while video in recording.
•
Infrared LEDs: invisible light for night time capture (940 nm).
•
LCD display: displays the setting and camera status.
•
Camera Lens: captures the images/videos.
•
Battery Tray Releaser: press to release the battery tray.
•
Switch: has 5 different positions: TEST (settings) / OFF / Preset
setting A / Preset setting B / Manual setting MAN.
•
Red LED: indicates PIR detection coverage in Test mode and
indicates low battery.
•
USB Port: allows you to connect the camera to a PC using the
provided USB cable for captured image/video download.
•
[▲] UP and [▼] DOWN Buttons: allow you to change the mode
Indice A 33/144