Before The First Use - Staba FG 70 Mode D'emploi

∙ Do not operate the appliance if it is damaged (for example if it
felt down).
∙ The manufacturer is not liable for damage occurred by using
the apliance in another way than described or if a mistake in
operating has been made.
∙ The apliance becomes very hot. Do not move the apliance until
it has cooled down!
∙ To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
∙ Attention! Housing and glass get hot. Danger of
burns! Do not place the appliance on a sensitive sur-
face (e.g. painted furniture)
product graphics FG 70 | position control
least 70cm to burnable materials. Only use it on a even, stable
and a heat resisting surface.

Before the first use:

Oil the grill slightly before the first use. Then heat up the device for ca 10 min with closed
product graphics FG 70 | position control
plates without food and the thermostat on maximum level. Afterwards clean the plates with
a humid cloth. Do not use agressive cleaners to avoid damages to the non-stick surface.
Usage options
Contact grilling:
Plates rest directly on top of food.
Excess fat runs into the collection tray.
Adjusted at adjusting hinge to
Toasties – au gratin:
The top plate is above the food
Adjust at adjusting hinge. Lift top part using handle and
adjust height
12
product graphics FG 70 | positi
and keep a distance of at
Party grilling:
Both grill plates are horizontal with double
grilling area. Adjust at adjusting hinge to
and swivel the grill open.
.
To make it easier for the oil to
drain from the open griddle, clip the
provided plastic part to the handle so
that it tilts at a slight angle.
product graphics
© GESTALTUNGSWESEN any unau