DeWalt DXDP710140 Manuel D'utilisation page 4

English
WARNING:
Tool lanyards or similar products are
never to be used as Personal Protective Equipment
(PPE). Never use any tool lanyard or their
subcomponents beyond their individual capacity
rating.
WARNING:
Do not alter or use in a manner other
than as instructed in this manual.
WARNING:
Do not attach more than one Tool
to each Lanyard (or lanyard leg).
WARNING:
This product is not serviceable.
If damaged or not functioning properly, replace
before resuming work.
WARNING:
Always select the proper tool lanyard
or attachment for the job. Ensure its rating matches
or exceeds item being attached.
WARNING:
Dropped tools will swing on the
lanyard, which could cause injury or loss of balance.
WARNING:
Inspect tool and lanyard before each
use for damage and proper function (including
fabric and stitching). Do not use if damaged or not
functioning properly.
4
TOOL ATTACHMENTS
CAUTION:
On some occasions the tools a user has to
carry for specific work at all heights do not come with built-
in or prescribed attachment options for the tool lanyard
connection. The D WALT range of tool attachments are the
E
perfect solution for such cases and help provide a secure
connection for the tool lanyard in the tethering system.
Different tools will require different tethering system
components depending on their shape and weight. Do not
use the tethering system for pulling or towing objects.
Fundamental steps:
a ) Choosing the attachment point on the tool.
b ) Choosing the lanyard connector.
c ) Choosing the anchor point.
Choosing the attachment point on the tool:
a ) This may be a hole on the handle or on the body of the
tool. Alternatively, the body of the tool may serve as an
attachment point.
b ) If the above options are not available, the attachment
point may be created on the tool directly.
c ) Use only with tools that are specifically designed for
D WALT
tethering, or by using appropriate attachment
E
accessories. NEVER modify tools to create attachment points.
Do not attach to a tool in a way that keeps guards, switches
or lock-offs from operating properly.
d ) Make sure the taping area of the tool is free of sharp edges.
SPECIFICATION OF THE TAPE:
Yellow in Color
Roll is 1" wide by 12' long
( 2.54 cm by 365.75 cm)
TOOL TAPE DXDP810100
WARNING:
Never cut the tape
on top of the lanyard, it could
weaken the structure of the
lanyard resulting in an accident.
USAGE COMPATABILITY:
Always use with the attachment swivel D-ring applied and stretch
DXDP710411
lanyard for connecting the tool. ( e.g. ). Note: Maximum
tool load for this type of attachment ( Tool Attachment + Self-Merging
Rubber Tape): 3 lbs./1.36 kg.
Folded end must face up.
CORRECT INCORRECT
TECHNICAL SPECIFICATIONS TABLE
Category Product Name
Tool Attachment Elastic Tool Attachment with Swiveling D-Ring
Tool Attachment Quick Connect Tool Attachment
Tool Attachment V-Ring Tool Attachment
Tool Attachment V-Ring Tool Attachment (single wing)
V-Ring Tool Attachment (double wing)
Tool Attachment
Tool Attachment V-Ring Tool Attachment (double wing)
Tool Attachment Tool Attachment with Swivel D-Ring
Tool Attachment Tool Attachment with Swivel D-Ring
Tool Attachment with Swivel D-Ring
Tool Attachment
Tool Attachment with Swivel D-Ring
Tool Attachment
Tool Attachment with Swivel D-Ring
Tool Attachment
Tool Attachment Cinch Loop Attachment
Tool Attachment Wire Tool Attachment
Tool Attachment Wire Tool Attachment
Tool Attachment Tool Tape
English
WARNING:
Only use appropriate D WALT brand
E
attachment accessories. NEVER modify tools to
create attachment points.
WARNING:
Always select the proper attachment
or lanyard for the job. Ensure its rating matches or
exceeds item being attached.
Positioning Swivel D-ring/connection point of tool
attachment:
a ) When installing the swivel D-ring make sure of its
placement so it can pivot freely.
b ) Fix the attachment swivel D-ring to the tool using self-
merging rubber tape.
c ) This tape is Self-Processing and doesn't rely on
chemical adhesives.
d ) It is water, oil and heat resistant.
e ) It provides long lasting adhesion
f ) No heat or additional precess required
Product Code Rating Length Material
DXDP710140 15 lbs 15" expanded, 11" relaxed Polyester,Steel
DXDP710211 5 lbs 15" expanded, 11" relaxed Polyester,Polymer
DXDP710200 12.5" Polyester,Steel
35 lbs
Polyester,Steel
DXDP710201 35 lbs 12.5"
Polyester,Steel
DXDP710221 35 lbs 12.5"
DXDP710222 80 lbs 21.6" Polyester,Steel
DXDP710411 3 lbs 2.5" Polyester,Steel
DXDP710422 4.5" Polyester,Steel
3 lbs
Polyester,Steel
DXDP710433 3 lbs 5.1"
DXDP710444 3 lbs Polyester,Steel
6.2"
Polyester,Steel
DXDP710455 3 lbs 8.5"
DXDP710600 5 lbs 6.5" Polyester,Steel
DXDP710700 2 lbs 6" PU,Steel
DXDP710710 3 lbs 6" PU,Steel
12' Silicone
DXDP810100 N.A.
5