Novy Cloud 230 Mode D'emploi Et D'installation page 18

3.1 Instruction for control keys
1
On/off
2
Motor
Choice
3
Confirmation
4
= Increase
Operation
fan speed
= Decrease
fan speed
Switch off
In order to be able to switch off, all the lights on
the remote control must be off.
1x = Run-out mode
2x (don't tap) = Device off
3.2 Extraction
Switch on
Press the control key .
The three LEDs above the symbols flash 1x.
Switch off with 10 minute delay
The LEDs on the remote control must first be off.
Press the control key once.
The lighting switches to ambience mode and the first,
white fan speed LED on the extraction hood flashes.
For recirculation, the motor continues running for 30
minutes. For exhaust, the motor continues running for
10 minutes. After this time, the motor will switch off.
The lighting will remain on in the mood mode.
Switch off without delay
The LEDs on the remote control must first be off.
Press the control key twice. Be careful, do not tap.
Use the 30 minutes run-out time to make sure that
the monoblock filter can properly absorb the cooking
smells.
Auto-Stop
To avoid that the hood will function during a too long
period, it will switch off automatically after 3 hours
(when no changes to the controls have been made).
Only the motor will turn off automatically. The lighting
will remain on in the mood mode
Functional light
Ambience light
press briefly
= attachment choice
press briefly
= lighting on
press briefly
= lighting off
press long
= increase brightness
press long
= decrease brightness
warm light
cold light
Fan speed
- Regulate the fan speed: Select control key
This means the speed can be adjusted
- Increase speed: Select control key
- Decrease speed: Select control key
The fan speed can be set to 4 speeds. You can select
the required position depending on the vapour produc-
tion while cooking.
A self-rectifying thermal contact makes sure that
the motor is switched off when overheated. The mo-
tor will switch on again after is has cooled down. The
cause of the overheating needs to be determined. This
may be, for example, that the contents of the pan have
caught fire, the motor fan is blocked or an object is
(partly) closing off the exhaust opening.
3.3 Lighting
With respect to the lighting you can choose between
the cooking mode and the mood mode.
Cooking mode
The cooking mode provides optimum lighting for
cooking. This mode has by default a maximum light
intensity.
- Switching cooking mode on
Select control key .
The LED above the symbol lights up.
- Confirm cooking mode
Briefly press the control key
For confirmation, you can see the LED above the sym-
bol flashing quickly for a short period.
The cooking mode is then fully activated and the follo-
wing functions can be changed..
- Switch cooking mode on and off
Switching cooking lighting fully on and off can be
achieved by briefly pressing the
- Mood mode light intensity
The brightness of the lights in cooking mode can be
increased or decreased using the
by holding these down, the brightness will change.
- Change the colour temperature in the mood mode
The colour temperature can be adjusted from warm to
cold using the or > control keys. Holding the keys
down will adjust the colour temperature. Release when
the desired colour temperature has been reached.
You cannot fully dim the light of the cooking
mode, because then there will not be sufficient
light to cook
After having switched off the cooking mode, the last
set value will always be remembered. This means your
preference will be used every time the hood is switched
on.
.
or control key.
and buttons;
EN 18