Publicité
Les langues disponibles
Les langues disponibles
EN
A
MOUNTING
[1] Wall mounted
[2] Din-rail mounted
[3] To remove the device from the DIN rail, press the flap
on the back of the device towards the housing and si-
multaneously push the housing upwards
B
WIRING
Complete the wiring and connect 24 V power supply.
[1] Wiring diagram
A. IP Bus (input/output)
The cable used for the IP Ethernet connection must be
a shielded cable.
n Not compatible with PoE switch.
CHARACTERISTICS
Supply voltage
Power Supply
Minimum current
Max. current
Minimum power
Terminals
Switch
Wind Sensor
Temperature Sensor
Relay out
Operating temperature
Relative humidity
Material of housing
Housing dimensions (w x h x d)
Weight
Degree of protection
Protection class
Conformity
CABLE
Connection to ...
Cable
Power Supply
Ethernet
min. Cat. 5e FUTP
Switch
Min.: 2 x 0.28 mm
Wind Sensor
Min.: 2 x 0.28 mm
Temperature Sensor
Min.: 2 x 0.28 mm
Relay Out
Min.: 2 x 0.28 mm
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.
7/20
- animeo Connect . IP Junction Module . Ref. 5140154C
24 V DC +/- 10 % SELV / 1 A max.
Mandatory use of certified power supply with limited power (certified according to the relevant version
of 60950-1 or 62368-1, EN/IEC or UL as needed in the country of use). Limited power classified as
LPS, PS2 or UL class II (according to standard).
23 mA
50 mA@24 V
0.55 W
Pluggable spring connectors
SELV, 24 V DC
SELV, 3.3 V DC
SELV, 3.3 V DC
Dry contact, NC and NO, 24 V/1 A max.
0 ° C ... + 50 ° C
85 % at 30 ° C
ABS
133 x 86 x 44 mm
166 g
IP20
www.somfy.com/ce
/22 AWG / Max.: 2 x 0.5 mm
/20 AWG
2
2
/22 AWG / Max.: 2 x 0.5 mm
/20 AWG
2
2
/22 AWG / Max.: 2 x 0.5 mm
/20 AWG
2
2
/22 AWG / Max.: 2 x 0.5 mm
/20 AWG
2
2
B. 3 minutes after switching on the device, the green
flashing LED indicates normal operation.
[2] Connection Options
C
COMMISSIONING AND OPERATING
Complete installation of all devices.
Run the animeo Connect Operating Software and follow the
procedure described in the software guide.
Shielded
Required
Twisted pair
Max. length
–
1.8 m
Required
100 m
–
100 m
–
100 m
–
100 m
–
100 m
Publicité
