Usb Device Playback - Yamaha TSX-140 Mode D'emploi

USB device playback

Problem
MP3/WMA file in the USB
device does not play.
Flashing USB indicator twice
is repeated 3 times after
connecting a USB device.
"Err" is displayed in the front
panel display after
connecting a USB device.
FM reception
Problem
Too much noise during
stereo broadcast.
Even with an outdoor
antenna, radio wave
reception is weak. (Sound is
distorted.)
Cause
The USB device is not recognized.
An incompatible USB device is
connected to the unit.
The USB device does not contain
playable files.
An incompatible USB device is
connected to the unit.
An overcurrent is detected.
Cause
The antenna may be connected
improperly.
The radio station you selected may be far
from your area, or the radio wave
reception is weak in your area.
Multipath reflection or other radio
interferences may have occurred.
TROUBLESHOOTING
Solution
Turn off the system and reconnect the USB
device to the unit.
Connect an AC adapter if supplied with the
device.
If the solutions above do not resolve the
problem, the USB device is not playable on
the unit.
Turn off the system and reconnect the USB
device to the unit. If it does not resolve the
problem, the USB device is not playable on
the unit.
Use a USB device contains playable files
(☞ P. 19).
Turn off the system and reconnect the USB
device to the unit. If it does not resolve the
problem, the USB device is not playable on
the unit.
Solution
Make sure the antenna is connected
properly (☞ P. 4).
Try manual tuning to improve the signal
quality (☞ P. 10) or use a multi-channel
outdoor antenna.
Change the height, direction, or placement
of the antenna.
17
En