Technical Specifications - Afriso EURO-INDEX KSG Notice Technique

3

Technical specifications

Fig.
4 Mounting/commissioning
WARNING
KSG
Table 1: Technical specifications
Parameters
Dimensions with insulation
(W x H x D)
System pressure
Temperature of medium
Material
Bottom connection
Inlet / Diameter
Range
Green area
Inlet
Nominal pressure
Response pressure
Inlet x outlet
Heat capacity
Scalding due to hot liquids in the system.
 Take all necessary measures during mounting, commissioning
and maintenance of KSG to ensure that hot liquids do not pose
any hazard to persons.
 During heating up, liquid must be able to escape via the dis-
charge line of the safety valve.
Install KSG in such a way that it cannot be shut off.
Do not install shut-off valves, filters or similar equipment.
 Install KSG in such a way that no external forces can act on the
components when it is installed.
– English –
KSG 3 bar
183 x 144 x 70 mm
3 bar
Max. 120 °C
Brass
G1
G
0 - 4 bar
1,5 - 3 bar
G
12 bar
3 bar
G½ x G¾
50 kW
Technical specifications
KSG Maxi 3 bar
1 / -PTFE / 63 mm
4
3
/
8
G¾ x G1
100 kW
9