Panasonic TY-CE85PS12 Manuel D'installation page 14

Precautions with regard to setting up
WARNING
Ensure that the installation location is strong enough to support long-term use.
• If its strength becomes insufficient over the course of long-term use, the display may topple over, possibly
causing injury.
Installation and removal should only be carried out by a qualified technician.
• If the ceiling-hanging bracket is not installed correctly, the Plasma display may fall down and become
damaged, and personal injury may result.
Make sure that all safety factors regarding strength of installation are observed.
• If the installation strength is insufficient, the display may fall down and personal injury may result.
Do not install in places which are unable to bear loads.
• If the strength of the installation surface is insufficient, the display may dropped and personal injury may
result.
Do not disassemble or modify the ceiling-hanging bracket.
• Otherwise the unit may be dropped and become damaged, and personal injury may result.
Take steps to prevent the ceiling-hanging bracket from falling.
• Failure to carry out the installation completely may result in injury or even death.
CAUTION
Do not install in places which are subject to humidity, dust, oil fumes, water vapour or excessive
heat.
• These can have adverse effects on plasma display operation, and fire or electric shocks may result.
Do not use any displays other than those given in the catalogue.
• Otherwise the unit may be dropped and become damaged, and personal injury may result.
Do not install the plasma display so that it is taller than it is wide.
• Otherwise the product may fall down and personal injury may result.
When installing or removing the plasma display, use a lowering device (machine), and ensure that
the work is done by at least four persons.
• Otherwise the product may fall down and personal injury may result.
Do not swing from the plasma display or its ceiling-hanging bracket; do not suspend anything from
the display or bracket.
• Otherwise the product may fall down and personal injury may result.
Do not block the ventilation holes. Do not block the space around the plasma display when using
the ceiling-hanging bracket.
• Otherwise heat may build up inside and cause a fire.
Secure at least 10 cm (3.9 inches) of space at the top, bottom, left and right of the plasma display.
Also secure at least 15 cm (5.9 inches) of space at the back.
• Failing to do so may result in a fire.
Dispose of the product when it is no longer going to be used.
• Otherwise, it may break and fall down, possibly causing injury.
When assembling and installing the ceiling-hanging bracket, make sure that the screws in all the
locations are tightened up securely.
• Failure to do so may result in warping, deformation, or degradation of materials, and a loss of strength
that may cause the equipment to fall over or break and cause injury.
14