Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
3 Assemble the intake grille.
– Check that the hooks on the back of the grille fit
correctly into the panel slot.
4 Connect the two decorative panel cables to the main
unit board.
Cable with
5 conductors
5 Fasten the electrical panel cover with two screws.
6 Close the intake grille and close the two hooks.
Fig. 25
Cable with
10 conductors
Fig. 26
Fig. 27
Fig. 28
19
Publicité
Chapitres
Table des Matières
