Tele Thermo Top Series; Installation Of I-Adapter - Webasto Telestart T80 Notice De Montage

receiver
Y-Adapter
connector of
digital timer
pushbutton
switch
- Connect Y-adapter to 4-pin connector
(digital timer)
- Connect Y-adapter to Telestart re-
ceiver
- Drill hole (dia. 8mm) in location
agreed upon with customer.
- Install pushbutton switch.
NOTE:
When inserting the contacts into the recep-
tacle housing of the pushbutton switch en-
sure that the color coding matches that of
the wiring harness.
- Insert contacts into receptacle hous-
ing of the pushbutton switch.
- Connect Y-adapter with 4-pin con-
nector to pushbutton switch.
CAUTION:
The default setting of the signal input must
be changed from digital timer to pushbutton
switch. See page 16.
Telestart T80

Tele Thermo Top Series:

Installation of I-Adapter

I-adapter
1
4 3
5 2
- Connect supplied short violet cable
(3) to violet cable (5) of wiring har-
ness using a crimp connector (4)
- Plug micro-timer (2) into free location
of the 4-pole connector (1) (digital
timer)
21