Installation; Installation Of Telestart Receier; Installation Of Antenna - Webasto Telestart T80 Notice De Montage

Telestart T80

Installation

The installation of the Telestart T80 may
only be performed by an authorised We-
basto dealer.

Installation of Telestart Receier

CAUTION:
The Telestart receiver must be installed in
the interior of the vehicle!
The preferred installation position is with
the plug-in connectors pointing downward,
with a maximum permissible deviation from
the perpendicular of <45° in either direc-
tion.
mounting bracket
receiver
- Define the installation location of the
receiver in the interior of the vehicle
(preferably near the digital timer in the
18
case of retrofits).
- Secure the mounting bracket using
sheet-metal screws.
- Fit receiver into the mounting bracket.

Installation of Antenna

NOTE:
Preferably, the antenna should be installed
in the interior of the vehicle, at the top in the
centre of the windshield or the rear window.
If installed in other locations, the range is
likely to be diminished.
For an optimal reception, a distance of 20
+/- 5 mm from the windshield edge is to be
maintained (see Fig.). The cable should be
routed upward, beneath the panelling in the
vehicle roof and then directed to the right or
left to the chassis member.
max. 300
NOTE:
If there is limited space, the antenna may
be installed up to 15 cm off centre.
- Clean windshield using grease-dis-
solving cleaner (e.g.methylated
spirits).
- Peel off protective film from antenna
and fix antenna into place.
NOTE:
Do not shorten antenna cable nor bend it
sharply.
Smallest winding diameter is 50 mm.
T80 antenna
receiver
- Route antenna cable to the receiver
and connect it to the receiver.