Using The Real Time Tape Counter; Using Zero Return - Citizen JCTV1586 Manuel D'instructions

TIMER RECORDING
TO SET DAILY/WEEKLY TIMER
When setting the date in the step 4 on page 21, press the
SET/TRACKING – button repeatedly when the current day
is displayed.
The setting changes as follows:
Example
The current day (Friday)
One month later
minus one day
WKL-WED
(Weekly Wednesday)
TO CONFIRM THE SETTINGS
Press the PROGRAM button once. The TV screen
displays the timer program list. Press the PROGRAM
button again. The TV screen displays the ON/OFF timer
setting.
(once)
23 TH 7:00 9:30 007 SLP
PM PM
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
〈+/–/ENTER/CANCEL/MENU〉
Press the PROGRAM button 3 times. The screen returns
to the normal screen.
TO CANCEL A PROGRAM
Press the SET/TRACKING + or –
button to select the TIMER REC
SET option in the MENU, then
press the ENTER button.
Press the SET/TRACKING + or –
button to select the unnecessary
program, and press the CANCEL
button to cancel the program.
IF THE PROGRAM OVERLAPS ANOTHER
NOTE: Do not overlap programs as portions of the
conflicting programs will be lost. The first
recording time has priority over the next recording
time as shown in the diagram.
8 : 00
Program 1
Program 2
Program 3
Recording
Prog.1
Control Settings
NOTES: • The everyday/every week recording can be
made continuously until the recording is
canceled or the tape reaches the end.
• During timer recording, the automatic
rewinding mechanism does not function.
• You can correct or cancel the programmed
22 setting in program confirm mode.
SUN-SAT (Sunday to Saturday)
MON-SAT (Monday to Saturday)
MON-FRI (Monday to Friday)
WKL-THU (Weekly Thursday)
(twice)
ON/OFF TIMER
ON TIMER
7:00AM CH012
MON-FRI SET
OFF TIMER
11:30PM SET
〈+/–/ENTER/CANCEL/MENU〉
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
----- --:-- --:-- --- -
〈+/–/ENTER/CANCEL/MENU〉
9 : 00
10 : 00 11 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
USING THE REAL TIME
TAPE COUNTER
The On-Screen Real Time Tape Counter shows the tape
running time in Hours, Minutes and Seconds.
You can easily determine how long the tape has been
running or how much time is left on the tape.
TO VIEW THE COUNTER DISPLAY
1
Press the CALL button.
2
Press the COUNTER RESET
button to set the counter to
"00:00:00".
3
Begin Playback or Recording to
start the tape, the counter will
display the elapsed time.
4
When you wish to make the
counter disappear, press the
CALL button once again.
NOTES: • If you rewind the tape from "00:00:00", a minus
sign ("–") will be displayed in front of the time.
• When you load a tape, the counter will reset to
"00:00:00".
• The counter does not function on nonrecorded
(blank) sections of the tape. When you rewind,
fast forward or play tapes through blank
sections, the counter stops.

USING ZERO RETURN

The zero return function provides a convenient
method of rapidly returning to the starting point of
recording or playback. The starting point can be
indexed for any location on the tape by pressing the
COUNTER RESET button and ZERO RETURN button.
1
Press the CALL button.
2
Before playback or recording,
press the COUNTER RESET
button to set the counter to
"00:00:00".
3
Begin playback or recording.
4
Press the STOP button.
5
Press the ZERO RETURN
button. The tape will rewind
and automatically stop at the
"00:00:00" position.
8 : 40AM THU
CH 012
00 : 30 : 50 SP
9:00AM THU
CH 012
00 : 00 : 00 SP
8 : 40AM THU
CH 012
00 : 30 : 50 SP
8:40AM THU CH 012
00 : 00 : 00 SP
9:00AM THU
CH 012
00 : 20 : 00 SP
9:00AM THU CH 012
00 : 00 : 00 SP