Quick View - Citizen JCTV1586 Manuel D'instructions

MUTING
Press MUTING button to switch
off the sound. The TV/VCR's
sound will be silenced and "MUT-
ING" will briefly appear on the
screen. The sound can be
switched back on by pressing this
button again or one of the VOL-
UME + or – buttons.
CHANNEL + / –
Press and release the CHANNEL +
or – button. The channel automati-
cally stops at the next channel set
into memory. For proper operation,
before selecting channels, they
should be set into the memory.
See pages 16 and 17 "To memorize
channels".
CALL
Press the CALL button. The clock, date, channel number,
real time tape counter, tape speed and VCR operation will
be indicated.
Press CALL button again to disappear the call display.
Current time
8 : 47AM THU Channel No.
CH 012
Auto Repeat
00 : 04 : 38 SP
Tape Speed
Real Time Counter
NOTE: To listen through the headphone, insert a
headphone (not supplied) with a 1/8" mini plug
into PHONES jack on the front. The sound from
the TV speaker is muted.
SLEEP
To set the TV/VCR to turn off after a preset amount of
time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of
the SLEEP button (120, 110, ...10, 0). After the sleep time
is programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting,
press the SLEEP button and the
remaining time will be momentarily
displayed. To cancel the sleep timer,
press the SLEEP button repeatedly
until the display turns to 0.
MUTING
VCR operation
: Play
: Rewind
: Fast-forward
: Eject
Tape In
: Recording
: Pause
: Stop

QUICK VIEW

This button allows you to go back
to the last channel selected by
pressing the QUICK VIEW button.
Press this button again to return to
the last channel you were watch-
ing.
TV/CAPTION/TEXT
Press TV/CAP/TEXT button to
switch between normal TV and the
two closed caption modes (captions
CH 012
and full screen text). Closed
captioning will display text on the
screen for hearing impaired viewers.
•
NOTES: If using an indoor antenna or if TV reception
is very poor, the Closed Caption Decoder text
may not appear. In this case, adjust the
antenna for better reception or use an outdoor
antenna.
•
When activating the Closed Captioned
Decoder, there will be a short delay before
the Closed Captioned text appears on the
screen.
•
Closed Captioned TV programs can be
recorded and played back on a VCR with the
Closed Captioned text intact. The Closed
Captioning text will disappear during Cue,
Rewind and Pause modes or if the VCR
tracking is not adjusted properly.
•
Closed Captioned text is only displayed in
locations where it is available.
•
If the Call display is on, the Closed Captioning
text will not appear.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired
viewers or it will translate and display text in another
language.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact.
The Closed Captioned text will disappear during Cue
(Fast Forward Search), Review (Rewind Search) and
SLEEP
120
Pause Modes or if the VCR tracking is not adjusted
properly.
TO VIEW CLOSED CAPTIONS
Press the TV/CAP/TEXT button on the remote control to
switch between normal TV and the two Closed Caption
Modes (Captions and Full Screen Text).
CH 012
CAPTION CH 1
15