Wamsler WP2-8 Instructions D'installation Et D'utilisation page 70

WP2-8_GB 70 / 189
Dismounting the cover of the
combustion chamber
After removing the two butterfly nuts, the
cover of the combustion chamber can be
lifted out from the boiler body by pulling it
upwards at an angle.
Warning!
When resetting these elements, pay
proper attention to the appropriate
tightness of the screws and the
undamaged nature of the gaskets!
The lack of adequate tightness may
cause malfunctioning!
Removal of the guide plate
After cleaning the guide plate, the plate
can be removed from the boiler body by
tilting it upwards at an angle.
Warning!
When resetting these elements,
ensure their correct positions,
because incorrect resetting may lead
to malfunctioning!