Diagnostic Errors; Water Pressure - ExtraStove HYDRO 20 Manuel D'installation

4.2.6 Required Program
4.2.7 Type of program
4.2.8 Enabling the program
4.2.9 Example of Programming
ATTENTION!
The boiler will function during the hours of ON programming at the
same temperature and the power settings as when it was last shut
down.
4.3 Mode Thermostat.
ATTENTION!
the set thermostat mode is the first that appears on display in the
menu "MOD. THERMOSTAT"
4.3.1 Internal Thermostat
4.3.2 External Chronothermostat
WARNING!
Once activated the function "external Chrono thermostat" will not
be able to turn on and turn off the machine manually from the di-
splay on the boiler (The on / off button on the display of the boiler
will be deactivated)
4.4 Boiler parameters
4.4.1 Pellets' Load
4.4.2 Smoke Extractor
4.4.3 Air Exchanging Fan
4.4.4 Function STAND-BY
OFF
3°-10°

4.5 Diagnostic errors

Error 1 / No Ignition
Error 3 / Failure of the Vacuum smoke circuit
Error 4 / Water temperature
Error 5 / Missing pellet
Error 6 / Alarm pressure switch
Error 8 / Missing voltage
Error 9 / Alarm engine flue gas
Error 10 / Over temperature alarm
Error 11 / Min water pressure alarm
Error 12 / Max water Pressure Alarm
Error 13 / Water Thermostat Alarm

4.6 Water Pressure

G