ExtraStove HYDRO 20 Manuel D'installation page 24

G
2.2 How to load pellets in the tank
3.0 Lighting the boiler
WARNING! The boiler must not be switched on untill the installation
of the smoke discharge, and above all of the hydraulic system has
been completed. Run the machine with the discharged plant could
damage the unit!
3.1 First start
3.2 Language Selection
3.3 Setting temperature
3.4 Setting the Program Operating
3.5 Turning on the boiler
WARNING!
Before lighting a small amount of smoke may fill the combustion
chamber.
3.6 Turning off the boiler
3.7 Reset System Errors
WARNING!
it is necessary to periodically clean the ash box.
The lack of cleanliness can prevent the starting of the boiler, causing
damages to the boiler itself and to the environment (possible emis-
sion of unbrunt material and soot).
Do not re-use the pellet possibly remained in the brazier due to no
starting-up.
3.8 Heating Mode
3.9 Automatic or Manual Mode
Manual mode:
Automatic mode:
4.0 User Programming
4.1 Adjust Date and Time
4.2 Weekly Programming
WARNING!
If you use the chronothermostat function when the boiler is on, the
digital clock in the boiler will stop until you finish working on the
menu. It is better to work on the chronothermostat menu when the
boiler is in stand-by (OFF).
4.2.1 Number of Program
4.2.2 Day of the week
4.2.3 Hour
4.2.4 Minutes
4.2.5 Temperature Required