ExtraStove HYDRO 20 Manuel D'installation page 19

Lighting
WARNING! The boiler must not be switched on untill the installation
of the smoke discharge, and above all of the hydraulic system has
been completed. Run the machine with the discharged plant could
damage the unit!
Maintenance performed by the A.A.C.
ATTENTION: During the first lighting it is necessary to ventilate the
environment well, since during the first hours of operation unplea-
sant odours could develop due to fumes from the paint and the
grease in the heat exchanger.
Operations to be performed by the Authorized Assistance Centre
every season before the lighting
WARNING
Should the boiler overheat, or in case of excessive water temperature, a safety
device will engage and block the feeder mechanism. After the boiler's cool-down
cycle has been completed, re-engage the thermostat placed at the back of the
boiler, by removing the thermostat's cap and pressing the button underneath.
In case of repeated malfunctions, please contact authorized technical support.
G