SMA Solar Technology FLX Pro 17 Guide D'installation page 29

Initial Setup and Start
NOTICE
When the PV configuration, installed PV power and PV
array area of follower inverters in the network differ
from that of the master, do not replicate. Set up the
follower inverters individually.
3 3
Illustration 3.17 Step 7 of 8: Replication
Step 8 of 8: Inverter start-up
The wizard displays an overview of the setup configuration.
Click on [Finish] to start up the inverter. Start-up will commence when solar irradiation is sufficient.
The start-up sequence, including self-test, takes a few minutes.
28 L00410568-03_2q / Rev. date: 2014-06-20