Hama 00012324 Mode D'emploi page 3

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Package Contents
• USB 2.0 hub
• These operating instructions
2. Safety Notes
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Do not drop the product and do not expose it to
any major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
• Do not open the device or continue to operate it if
it becomes damaged.
• Do not operate the product outside the power
limits given in the specifications.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out of
the reach of children!
Warning – Data Loss
• Make sure that no more data is transferred
before removing a USB memory from the hub.
Always remove the removable storage medium
via the eject function of your operating
system before taking the storage medium
out of the hub or before separating the hub
(with plugged in storage medium) from your
terminal device
• Data loss can´t be excluded at disregard!
2
Warning
• Ensure that the overall power consumption
of all USB devices connected to the hub does
exceed 500 mA (for USB 2.0 Host Controllers).
• Consult the operating instructionsv or the
technical specifications of the connected
devices and your computer.
• It is essential that you observe these
specifications and the safety instructions
regarding the power supply of your devices.
3. Startup and Operation
• Switch on your computer and boot the system (A).
• Connect the hub to a free USB port on your
computer (B).
• You do not have to install drivers, the computer
will automatically recognise the USB hub.
• If necessary, follow the instructions for your
operating system (C).
• In order to use your USB devices, plug them into
the hub one after the other (D).
4. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
5. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
6. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com