Important Remark - GRE BC3800 Mode D'emploi

14. FIGURE 3 –Maintenance and Inspection
15. Troubleshooting guide
Incorrect installation may result in an electrical charge that could lead to death or serious injury of
users, installers or others by electrical shock and it may also cause damage to heat pump.
DO NOT attempt to modify the internal configuration of the heat pump.
1. Keep your hands and hair clear of the fan blades to avoid injury.
2. If you are not familiar with your pool filtration system and heat pump:
a. Do not attempt to carry out any adjustment or service without consulting your dealer,
pool professional or air conditioning contractor.
b. Read the entire installation manual before attempting to use, service or make
adjustments to the unit.
c. Wait for 24hours after the installation before starting the heat pump to
damage to the compressor. (If the heat pump has been transported and carried all the
time with the feet down, it can be started immediately).
Note: Switch off the power before carrying out any maintenance or repairs.
IMPORTANT REMARK: if a malfunction cannot be resolved immediately, in order to analyse the
problem we will need to know the message (error code) that is showing on the display controller as
well as the values for the settings (parameters 0-A). We also need to know the status of the heat
pump: the ambient temperature, water inlet / outlet temperature, if there is cold air coming out from
the heat pump, if the grill (evaporator) is cold, or if there is ice on the heat pump.
Please keep this information at hand when calling customer service (describe the issue).
On the following pages you will find an overview of the different types of failure problems that can
occur together with instructions on how to solve them.
- 9 -
prevent