Important Safety Instructions - Kärcher HDS 2.3/12 C ED Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

WARNING
When using this product basic precautions
should always be followed, including the
following:
1 Read all the instructions before using
the product.
2 High pressure jets can be dangerous if
misused. The jet must not be directed at
persons, animals, electrical devices, or
the unit itself.
3 To reduce the risk of injury, close super-
vision is necessary when a product is
used near children.
4 Know how to stop the product and
bleed pressures quickly. Be thoroughly
familiar with the controls.
5 Stay alert – watch what you are doing.
6 Wear safety goggles.
7 Do not use acids, alkaline, solvents, or
any flammable material in this product.
These products can cause physical in-
juries to the operator and irreversible
damage to the machine.
8 Do not operate the product when fa-
tigued or under the influence of alcohol
or drugs.
9 Do not overreach or stand on unstable
support. Keep good footing and bal-
ance at all times.
10 To reduce the risk of electrocution,
keep all connections dry and off the
ground. Do not touch plug with wet
hands.
11 The Trigger Gun Safety Lock prevents
the trigger from accidentally being en-
gaged. This safety feature DOES NOT
lock trigger in the ON position.
12 Keep operating area clear of all per-
sons.
13 Close cover before operating the ma-
chine.
14 This appliance is intended for commer-
cial use.
15 Follow the maintenance instructions
specified in the manual.
16 This machine has been designed for
use with cleaning chemicals supplied or
recommended by the manufacturer.
The use of other cleaning chemicals
may affect the operation of the machine
and void the warranty.
17 This product is provided with a Ground
Fault Circuit Interrupter built into the
power cord plug. If replacement of the
plug or cord is needed, use only identi-
cal replacement parts.
18 Do not use extension cord with this
product.
Injection hazard: equipment can cause
–
serious injury if the spray penetrates the
skin. Do not point the gun at anyone or
any part of the body. In case of penetra-
tion seek medical aid immediately.
This system is capable of producing
–
1100 psi/7.6 MPa.
To avoid rupture and injury, do not op-
erate this pump with components rated
less than 1100 psi/7.6 MPa working
pressure (including but not limited to
spray guns, hose and hose connec-
tions).
Before servicing, cleaning, or removal
–
of any part, shut off power and relieve
pressure.
Do not spray electrical apparatus and
–
wiring.
High Pressure. Keep clear of nozzle.
–
If connection is made to a potable water
–
system, the system shall be protected
against backflow.
EN 5