Recommended Safe Distance Between Portable And Mobile Hf Telecommunications Equipment And The Elements E-Motion - KaVo Kerr elements e-motion Mode D'emploi

12 Information about electromagnetic compatibility | 12.4 Recommended safe distance between portable and mo-
Note 2: These guidelines may not be applicable in every case. The propagation
of electromagnetic waves is subject to absorption and reflection by buildings,
objects, and people.
12.4 Recommended safe distance between portable and
mobile HF telecommunications equipment and the
elements e-motion
The elements e-motion is intended for use in an electromagnetic environment
in which the HF interference parameters are controlled. The customer or user of
the elements e-motion can help prevent electromagnetic interference by main-
taining the minimum clearance between portable and mobile HF telecommunic-
ation devices (transmitters) and the elements e-motion depending on the out-
put of the communication device as indicated below.
The table shows the necessary safe distance as a function of the transmission
frequency in m:
Rated maximum out-
put power of trans-
mitter in W
0.01
0.1
1
10
100
For transmitters whose maximum rated power is not included in the above
table, the recommended safe distance d in metres (m) can be calculated using
the equation for the respective column, where P is the maximum rated power
of the transmitter in Watts (W) as specified by the manufacturer.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not be applicable in every case. The spread of
electromagnetic waves is absorbed and reflected by buildings, objects and
people.
bile HF telecommunications equipment and the elements e-motion
150 kHz to 80 MHz
d=1.17
P
0.12
0.37
1.17
3.70
11.70
55 / 55
Instructions for use elements e-motion Dental Motor
80 MHz to 800 MHz
d=0.35
P
0.04
0.11
0.35
1.11
3.5
800 MHz to 2.5 GHz
d=0.70
P
0.07
0.22
0.70
2.21
7.0