Display Information - KaVo Kerr elements e-motion Mode D'emploi

Instructions for use elements e-motion Dental Motor
5 Startup | 5.2 Changing the device settings

Display information

Setting
The shifting of the files in the file editor can be
switched on or off.
Press the "ON/OFF" control element to switch the
shifting of files in the file editor on or off.
In the default setting, the shifting of files is switched
off (OFF).
See also:
2 6.4.7 Defining/changing file sequences in the file
editor, Page 35
You can select from 3 different kinds of key tones
upon touching a control element.
The volume of the tone when you touch a control
element can be adjusted between 1 and 3.
The volume of the notifying signal can be adjusted
between 1 and 3.
The torque display can be selected to be in units of
Ncm or gcm.
To switch the unit, press the displayed unit.
Reset the device to factory settings.
Restores the condition of the device at the time of
delivery.
Press the "Factory settings" control element to reset
the device to factory settings.
The reset needs to be confirmed in an additional
step.
Defined file sequences are deleted and reset.
Display of the software versions of the panel and
motor.
28 / 55