KaVo Kerr elements e-motion Mode D'emploi page 39

▶ Tap the "Pen" control element again to edit the file name.
ð
All other data need to be selected manually by the user.
▶ Assign all other data in accordance with the specifications of the file manu-
facturer. For this purpose, tap the respective column and shift it until the
data value is shown with a blue background.
▶ Tap the "Back" control element to terminate the processing of file se-
quences.
ð
The set data are saved.
TF Adaptive
Kerr recommends the Adaptive Motion for TF Adaptive files.
▶ To use the TF Adaptive, select the sequence "KERR TF ADAPTIVE"
▶ Select the "TFA" file, if applicable.
Note
The sequence "KERR TF ADAPTIVE" contains the "TFA" file, both are pre-in-
stalled as the first sequence and first file. These configuration can be changed
by the user.
▶ To add the TF Adaptive file to another sequences, proceed as follows:
▶ Open the file editor, then tap file sequence "CUSTOM SEQUENCE" to display
the selection list of the file sequences.
▶ Tap the "Pen" control element to edit the sequence.
Instructions for use elements e-motion Dental Motor
6 Operation | 6.4 Operating the elements e-motion
39 / 55