Specifications - Emerson Sola HD SDU Série Manuel D'instructions

Description
INPUT
Capacity VA/Watts
Voltage (Single Phase)
Frequency
OUTPUT
Voltage (on battery)
Frequency (on battery)
Transfer Time
PROTECTION
Unit Input
Overload Protection
Short Circuit
BATTERY
Type
Typical Recharge Time
(to 90% of full capacity)
Backup Time
(at full load)
ALARM
ON Battery
Battery Low
Overload
ENVIRONMENT
Ambient Operation
Audible Noise
WEIGHT & DIMENSIONS
Net Weight, lb. (kg)
H x W x D, in. (mm)
SAFETY/APPROVALS
*For Conditions of Acceptability in accordance with UL 508A, see "13.0 Conditions for Safe Use of SDU 500 & 850".
English version

12.0 Specifications

SDU 500
500/300
120 V + 10%, -20%
120 V +/-5%
Circuit breaker for overload and short circuit protection
UPS automatic shutdown if overload exceeds 105% of nominal at 20 s, 120% at 10 s, 130% at 3 s
4 min.
0–95% humidity, non-condensing. 50
10.7 (4.7)
UL 1778 C-UL Recognized* for industrial
applications in accordance with UL 508A
without derating. Overvoltage Category 3,
Pollution Degree 3. FCC Part 15, Subpart B,
Class A.
Catalog Number
SDU 850
850/510
50 or 60 Hz, +/ -10% (auto-sensing)
Simulated sine wave
50 or 60 Hz, +/-0.5% auto-sensing
<4 milliseconds
UPS output cut off immediately
Sealed, maintenance-free, lead acid batteries
8 hours
2 min.
Slow beeping every 4 seconds
Rapid beeping every second
Continuous beeping sound
<40 dBA (1 m from surface)
11.4 (5.0)
4.88 x 11.1 x 4.55 (124 x 281 x 116)
CE Marked; LVD: EN62040-1-1; EMC:
EN50091-2, EN61000-3-2, EN61000-3-3,
IEC801-2, IEC801-3, IEC801-4, IEC1000-2-2
SDU 500-5
500/300
230 V +/ -20%
230 V +/-5%
4 min.
C up to 10,000 ft. (3000 m).
°
11.5 (5.2)
SDU Series Instruction Manual • 13
SDU 850-5
850/510
2 min.
11.9 (5.4)