auna MC-30 DAB Mode D'emploi page 40

EN
40
Changing the scan setting
In FM mode:
1. Press and hold the Menu button on the Micro System or on the remote
control. Scan setting will be displayed and highlighted. Press the rotary
control on the Micro System to Select or the Select button on the
remote control. There are now two different options to choose from and
the current setting will have a tick next to it:
Strong stations
The scan will only stop when a strong signal strength is received which
should also result in a better audio quality. It is possible that the station
you are scanning for may be missed using this option.
All stations
The scan will stop for every station it receives, even if the signal
strength is poor.
2. Use the rotary control on the Micro System or the Previous/Next
buttons on the remote control to move to and choose from the two
options available. Press the rotary control on the Micro System to
Select or the Select button on the remote control to confirm.
3. Press and release the Menu button on the Micro System or on the
remote control to exit from the Menu.