auna MC-30 DAB Mode D'emploi page 36

EN
36
Storing a DAB station preset
Your Micro System can store up to 30 DAB radio stations in its preset
memories for instant access to your favourite stations.
1. Tune the Micro System to the DAB radio station that you wish to preset.
2. Press and hold the Preset button on the Micro System or the Prog.
button on the remote control for approximately 2 seconds until 'Save to
Preset' is displayed.
3. Use the rotary control on the Micro System or the Previous/Next
buttons on the remote control to move to the preset location that you
would like to store the radio station to (1-30).
4. Press the rotary control on the Micro System to Select or the Select
button on the remote control. The display will confirm 'Preset X saved',
where 'X' is the number of the preset (1-30).
Note: If there is already an existing DAB station stored under a preset, it
will be over written when you store the new station.
Tune to a DAB station preset
In DAB mode:
1. Press and release the Preset button on the Micro System or the Prog.
button on the remote control. 'Preset Recall' is displayed together with
the preset list.
2. Use the rotary control on the Micro System or the Previous/Next
buttons on the remote control to move to the Preset location and
station that you would like to listen to (1- 30).
3. Press the rotary control on the Micro System to Select or the Select
button on the remote control. The Micro System will instantly tune to
that station and begin to play.
Note: If no DAB station has been stored under the preset button, 'Preset
Empty' will be displayed, then the Micro System will revert to the
previously selected radio station after a few seconds.