Technical Data - auna MC-30 DAB Mode D'emploi

EN
48
Auxiliary Input mode
Check that your Micro System is in Auxiliary input mode. If you are not
already in Auxiliary input mode, briefly press and release the Mode button
on the front of the Micro System or on the remote control, until you are in
Auxiliary input mode (check the display).
Using a 3.5mm audio input connection cable (not included), Auxiliary input
allows for a quick and easy connection to an external sound source.
1. Connect one end of the 3.5mm audio connection cable to the
headphone (or auxiliary out) socket of your secondary device, connect
the other end to the Line in socket on the back of your Micro System.
2. Press the Play button on your external device to start playback through
the Micro System speakers.
To gain optimal volume levels, adjust the output volume level on both the
secondary device and on the Micro System.
Note: It is recommended that you unplug the Audio cable from the Line
in socket after you have finished listening to your external device.

TECHNICAL DATA

Item number
Power supply
FM frequency
DAB frequency
BT version
BT profiles
10033048, 10033050
220-240 V ~ 50/60 Hz
87.5-108 MHz
Band III, 174-240 MHz
5.0
A2DPV 1.2, AVRCPV 1.4