Unloading; Dc Models - Upright UL25 Guide De L'opérateur

068017-021 UL25, UL32 & UL40
U
N L O A D I N G
1. Unsecure the unit.
2. Release the locking pin and pull the T-handle out until the locking pin engages the hole in the end of the
T-handle.
3. Roll the unit back until the rear wheels are off the edge of the tailgate or vehicle bed.
4. Pull downward on the T-handle, allowing the unit to slide on the loader.
• As the unit stops sliding on the loader, it will pivot on the loader to an upright position.
• Gradually counterbalance the unit's weight by applying an upward force on the T-handle. This allows
the unit to settle gently on the wheels, avoiding undue impact on the unit.
5. Return the T-handle to the stored position, making sure that the locking pin engages the T-handle.
DC M
ODELS
Replace the battery and reconnect the battery box plug, making certain it is fully engaged.
Loader Channel
Gravity Hook
Loader
Loader in Load Position
Page 10
Retaining Pin
Loader Support
Bracket
Tailgate
Tilting the Machine Onto or Off of a Vehicle
Transporting the Work Platform
Figure 6: Loading the UL for Transportation
Retaining Pin
Retaining Pin
T-Handle Positioning
Operation Manual