Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How To Control The Unit
Two ways to operations:
A. Master/Slave operation
B. Universal DMX controller
A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to give an
automatic, sound activated. This function is good when you want an instant show. You have to set
the first unit in Automatic,sound activated mode . Its DMX input jack will have nothing plugged into
it. The other units will have to select SLA , Their DMX cables plugged into the DMX input jacks
(daisy chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to 512
channels so that the units can receive DMX signal.
Press the MENU button, find Addr,press ENTER, then A001 is showing on the display.,Use DOWN
and UP button to change the DMX512 address.
13
Publicité
Table des Matières
