CASO DESIGN Slow Juicer SJW 450 Mode D'emploi page 33

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
► Do not leave the device unsupervised when it is in operation.
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs that may be needed.
Improperly performed repairs can cause considerable
dangers for the user.
► Only customer service departments authorized by the
manufacturer may carry out repairs on the device during the
guarantee period, as otherwise the guarantee entitlements
will be null and void in the event of any subsequent damages.
► Defective components must always be replaced with original
replacement parts. Only such parts will guarantee that the
safety requirements are fulfilled.
► Never immerse the device, cord or plug in water or other
liquids and do not place in the dishwasher.
► Do not overload the device and do not let it operate un-
loaded.
► Do not empty the residue barrel before removing the plug out
of the plug socket.
► Be sure the parts are properly assembled and in place.
► The food must fulfil national standards.
► If you misuse the device it can lead to injuries.
► The blades in the feeding tube are very sharp. Do not touch
them.
► Do not use any accessories not recommended by the
product manufacturer to avoid danger.
► Avoid contacting moving parts.
► Always make sure that the device is correctly assembled
before switching it on.
► Be sure to turn switch to O position after each use of your
juicer. Make sure the motor stops completely before
disassembling.
► Do not put your fingers or other objects into the juicer while
operation. If there is food stuck in the feeding port, only use
the pushing bar or another piece of fruit/vegetable to push it
Caso Entsafter „Whole Slow Juicer" SJW 450
Please note
33

Publicité

Table des Matières
loading

Table des Matières