Télécharger Imprimer la page

Frico Elztrip EZ100 600 Mode D'emploi page 9

Masquer les pouces Voir aussi pour Elztrip EZ100 600:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Regulation alternatives
Single heaters can be controlled by any Frico room
thermostat. Where the demand on heating comfort
is higher, a group of heaters are preferrably
controlled by Frico electric heating regulator ERP.
CIRT is suitable for spot and zone heating
installations.
Accessories
T10, electronic thermostat
Can control the heat directly or via contactor when
larger loads need to be controlled. Internal
temperature setting +5 to +30°C. Required
connection voltage: 230V. Protection class: IP30.
TKS16, electronic thermostat
External temperature setting, +5 to +30°C.
Function switch for on/off connection of the
thermostat. A fixed temperature reduction of 4°C
can be activated by an external contact such as a
timer. Optional connection of external sensor.
Protection class: (IP30).
KRT1900, capillary tube thermostat
Internal temperature setting 0 to +40
connection voltage 230/400V (volt free contact).
Protection class: IP55.
ERP, electric heating regulator
ERP is a modern, variable regulator that adapts the
energy use exactly to the demand and allows for
full use of the advantages with radiant heating. The
result is a warm heat and more energy efficient
use. For use on 230V and 400V2~ (not 3-phase
loads).
Load 3600/6400 W. Slave unit ERPS can be used
with larger outputs (ERPS handles the same
outputs as ERP). Protection class: IP20.
Technical specifications
Type
Heat output
[W]
EZ106
6 0 0
EZ111
1050
EZ115
1500
Protection class Elztrip EZ100: (IP44), splash-proof design.
Approved by SEMKO and CE compliant.
Elztrip EZ 100
o
C. Required
Voltage
Min. cable Ø
[V]
[mm
2
]
230V~
1.5
230V~
1.5
230V~
1.5
CIRT, variable output regulator
Especially suited for spot and zone heating.
The heat contribution is regulated for best comfort
(30-100%). Built-in timer that can be set on one to
eight hours in the standard setting. For use on 230V
and 400V2~ (not 3-phase loads). Load 2300/
5000W. Protection class: IP44.
EZMVK, mounting bracket
To mount EZ100 on the wall. Read more on the
previous page.
More alternatives are available in the Frico assort-
ment.
Illustrations and dimensions of accessories,
see page 3.
The warranty is only valid if the units are used
in accordance with the Frico installation and
operating instructions.
Dimensions
Distance
LxHxW
between brackets
[mm]
[mm]
1000x50x150
7 4 4
1500x50x150
1244
2000x50x150
1744
GB
Max. surface
temperature
[°C]
2 8 0
2 8 0
2 8 0
9

Publicité

loading

Ce manuel est également adapté pour:

Elztrip ez100 1500